Post Image

Share this post and help spread the love!
Share on Google+Pin on PinterestTweet about this on Twitter

Shares: 2

W10415587 – Washing Machine Water Level Sensor Repair

If  you’re experiencing the F35 and SUD error codes then you can use a volt meter and take some readings to determine if your CCU or the water level sensor is causing the error codes. See F35 Error Code Help videos.

Once you have determined that your W10415587 water level sensor or analog pressure sensor (APS) has failed and is causing you the F35 and SUD errors you will need the W10415587 APS repair kit.

There are two W10415587 repair kits depending on if you have the surface mount (SMT) pressure sensor or the through-hole (TH) pressure sensor. See photos below:

 

APS Through hole sensor

Through-hole (TH) Pressure Sensor IC

 

 

 

 

 

 

 

 

 

APS SMT Sensor

Surface Mount (SMT) pressure sensor IC

 

You will have to disassemble the water level sensor to have a look and see which version of the pressure sensor you have and order the correct kit… You will need a low wattage (25 – 35 watt) soldering iron. Don’t worry… the DVD will show you how to replace the pressure sensor IC which is what fails in 99% of all cases.

I hope this was helpful and that it will save you from an expensive service call.

 

Jeff Hartman

www.f35error.com

 

 

Share this post and help spread the love!
Share on Google+Pin on PinterestTweet about this on Twitter

Shares: 2

Wealth By Jeff Hartman

Submit your e-mail address to receive regular updates!










Author Image

Thank you for reading my posts! If you would like to connect, reach out to me on Facebook.

Facebook LinkedIn